base map ls vtec turbo w/550cc

96ont3gra · Post by **96ont3gra** » Thu Apr 24, 2008 12:27 pm

wondering if someone has a basemap for ls vtec turbo w/ 550 cc RC injectors...GSR cams
im new to this whole hondata... if i get a base map, how do i upload it?

one_boosted_si · Post by **one_boosted_si** » Fri Apr 25, 2008 12:52 pm

I don't have a map for you but once you obtain one, open it in smanager and under "Online" select "upload" or simply ctrl+u. This will load the calibration into the ECM. This is also how you upload any changes to parameters,settings, etc.

JDM_Honda_349 · Post by **JDM_Honda_349** » Fri Apr 25, 2008 10:31 pm

Not trying to jack your thread but Im also interested in what has to be done cause Im new to Hondata as well.You just upload your base map into your ecu and your able to start up and drive your car to your tuner?How well does the car run on a basemap? Dont want to run the car 2-3hrs if the basemap isn't going to run half decent. Maybe someone can answer my questions?

one_boosted_si · Post by **one_boosted_si** » Sat Apr 26, 2008 1:33 pm

You'll have to make adjustments to the basemap as not every car/setup is the same. Make sure you have a wideband so you can see how it's running. You can make crude adjustments to get the car running, of course, if it's a long drive and you don't trust your tuning ability then you should trailer it.