1994 honda civic EX
s300 w/ boost and GM solenoid
custom turbo kit
wastegate spring is 7 psi, set the boost to 7 psi, but it doesn't hold it and boosts till the cut at 10 psi,
how do i get it to hold 7 psi?
Boost solenoid not working
Boost solenoid not working
You do not have the required permissions to view the files attached to this post.
Td16z6
Have you used the fixed duty cycle to create a table so you know what duty cycles create what level of boost?
The Pressure vs Duty Cycle table contains a lookup of pressure valves which correspond to a solenoid duty cycle. The values for this table must be set by using a fixed duty cycle (see Control Method) and noting the resulting manifold pressure. Note that different ambient conditions will result in slightly different boost pressures for the same duty cycle.
The Pressure vs Duty Cycle table contains a lookup of pressure valves which correspond to a solenoid duty cycle. The values for this table must be set by using a fixed duty cycle (see Control Method) and noting the resulting manifold pressure. Note that different ambient conditions will result in slightly different boost pressures for the same duty cycle.