New to Hondata

teamx · Post by **teamx** » Sat Jan 26, 2008 2:08 pm

Hi guys.

I'm planning a custom turbo setup on my '99 Balllade Vtec (Similar to the Civic Si in the States).

I want to use the Hondata S300 system to run it all.

As I'm in South Africa I'm a bit concerned about compatibilty issues.

Any help would be welcome.

Ps. My knowledge of ECU's and ECU tuning is very limited.

Post by **Spunkster** » Mon Jan 28, 2008 10:40 am

To use a Hondata system, you will need to use a compatible OBD1 ecu from the list at http://www.hondata.com/ecus.html. You can then use the Hondata s100 or s300 depending on what options you want (http://www.hondata.com/sproducts.html). I would recommend the s300.