suggestions for injector size for type-r turbo

[boosted crx-r]

i got hondata s300 on a P72, jdm b18c type-r, 81 mm bore, 9:1 je pistons, eagle rods, Edelbrock intake manifold, venom fuel rail, plx wideband, Msd external blaster coil and cap, T3/T4 turbo with ramhom manifold, tial evolution 35mm wastegate, and 3" exhaust. Im gonna tune for 12 psi. and would like to know what injector size would be best.

[Spunkster]

Injector size depends on the power output you plan to make. Discuss this with your tuner.

[hondatechpr]

I suggest you to buy a 850cc because you will have enough fo the 12 psi and for much more, close to 650PH if you want, and have to buy injectors just once. And the best of all is that the Hondata will handle them pretty well

[thething96]

You should get a minimum of 550's. I maxed out some 550's on a similar setup at 18 psi........