need base map for NA mild build ls/vtec

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Locked
bri94lst
Posts: 1
Joined: Thu Mar 29, 2007 11:15 pm
Location: CT

need base map for NA mild build ls/vtec

Post by bri94lst »

Setup...

B18b 81mm bore
PR3 (B16) pistons
B16 head
US ITR Cams
RC 440cc injectors
Top
Spanky
Posts: 20
Joined: Tue Nov 15, 2005 12:55 pm
Location: Infront of mustangs

Post by Spanky »

thats a very similar set up to what im running. the only difference is im running a type r head with bc iv cams, with stock injectors @ 50 psi fuel pressure. Im running a modified b18c5 type r base map with a plx m300 wide band o2. Its a good starting point.
"My other car is a camaro, but today I was in a hurry."
Top
Locked

Return to “S300 Calibrations”