Need some help datalogs included

K-Series Programmable ECU installation questions / support issues
Locked
EMk20a2
Posts: 7
Joined: Sun Jan 28, 2007 11:24 am

Need some help datalogs included

Post by EMk20a2 »

Setup:
K20a2
strupp race header
V2 intake
Skunk 2 exhuast
Kpro dyno tuned

Today I noticed hesitation under initial throttle input in low rpms of 6th gear. The hesitation was so slight that I honestly thought I was just being paranoid. This was until I had this happen for atleast 3 seconds upon dropping into 4th gear. The problem happened only a couple more times and was completely random. I came home and did some dataloging, while I noticed a slight problem, I was unable to catch anything noticeable on the datalog. What I did notice was a couple of knocks that were encountered during the logging. I am no expert on tuning, but do know generally what a knock means, but don't know how to determine what is causing a knock and if it is a problem that I shoudl be concerned with. Intially I thought it was the manner in which I had been driving the car on/off throttle trying to duplicate the problem that I had earlier experianced. The off/on thottle had caused a knock, but then I noticed some earlier datalogs with knocks. I really don't know what could be causing the hesitation that I had experianced on the highway, what is causing the knocks, or if the two are related, let alone how to fix either problem. I have inluded a couple of datalogs for the experts to look at.
You do not have the required permissions to view the files attached to this post.
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

need to post the calibration
Locked