Safe to use?

sgBatmobile · Post by **sgBatmobile** » Sun Aug 19, 2007 12:52 am

Hi,

I recently got my car re-tuned and also have the opportunity to share the tuning map with some of my friends. I have some feedback that the ignition timing is too high and may results in knocking if I am not using octane booster.

My car set up is K20A with Toda A3 CAMs, widen throttle body with intake and exhaust all done up.

I would like to seek the opinions of the experts here by sharing my kal file.

All comments positives or negatives are welcome.

Thanks.

Post by **Spunkster** » Mon Aug 20, 2007 10:26 am

If you get knocking, use the K-Pro to retard the timing where it is getting the knock.

sgBatmobile · Post by **sgBatmobile** » Mon Sep 10, 2007 8:22 am

It is normal to have knock?
How accurate is the knock sensor picking up the correct knock, since modified engine will be noiser too.

Post by **Spunkster** » Mon Sep 10, 2007 10:23 am

The knock sensor is pretty accurate. Only a supercharger or forged pistons will give false knock.