RPM Index bug?

rsxmachine · Post by **rsxmachine** » Sat Sep 01, 2007 7:22 am

I'm working on a calibration that has the RPM index rows rescaled, and I noticed something odd when reviewing datalogs. with the "Tables Follow VTEC/Cam Angle" options on, as you click thru the datalog, the corresponding highlighted area of the tables is in the wrong place! in other words the red pointer block is in the correct rows using the standard kal's, but with one that has been RPM-reindexed it is not, it goes to the same row as if it were on the default RPM scale.

is this just a bug in the way KManager is following the tables? because it makes me worry whether the ECU is also incorrectly reading the reindexed tables. Thanks

impc · Post by **impc** » Mon Sep 03, 2007 5:59 am

try this
1. change rpm index in calibration.
2. upload calibration.
3. record datalog

basically u need to upload changed calibration before u can take adventage of changed rpm indexes.

rsxmachine · Post by **rsxmachine** » Tue Sep 04, 2007 8:57 pm

I think you're right, we were working with 2 kals and the datalogs with the first did not want to match up with the kal I reindexed. now after uploading the new datalogs seem to match up as expected :)