daughterboard com error

K-Series Programmable ECU installation questions / support issues
User avatar
Spunkster
Site Admin
Posts: 23884
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

Try clearing security then uploading a completely new calibration and see if the problem still occurs.
kornsined
Posts: 53
Joined: Wed Feb 08, 2006 9:04 pm
Location: Edmonton

Post by kornsined »

did that when I tested it on a different car and the problem never occurred.
2004 Civic EX Coupe
K20a3 RSX spec, Greddy turbo kit w/FMIC, Apexi WS II Turbo muffler, 3" custom ... mandrel exhaust, KPRO = 230.03WHP 213.16WTQ
kornsined
Posts: 53
Joined: Wed Feb 08, 2006 9:04 pm
Location: Edmonton

Post by kornsined »

Again the problem happens. My ecu was sent to Hondata and is fine. My charge system was tested by Honda and is fine.
Last edited by kornsined on Wed Sep 05, 2007 7:09 pm, edited 1 time in total.
2004 Civic EX Coupe
K20a3 RSX spec, Greddy turbo kit w/FMIC, Apexi WS II Turbo muffler, 3" custom ... mandrel exhaust, KPRO = 230.03WHP 213.16WTQ
User avatar
Spunkster
Site Admin
Posts: 23884
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

Sounds more like you are hitting a lean cut. Can you provide a datalog and the calibration from when this happened?
kornsined
Posts: 53
Joined: Wed Feb 08, 2006 9:04 pm
Location: Edmonton

Post by kornsined »

Thanks for the info.
Last edited by kornsined on Wed Sep 05, 2007 7:09 pm, edited 1 time in total.
2004 Civic EX Coupe
K20a3 RSX spec, Greddy turbo kit w/FMIC, Apexi WS II Turbo muffler, 3" custom ... mandrel exhaust, KPRO = 230.03WHP 213.16WTQ
User avatar
Spunkster
Site Admin
Posts: 23884
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

What is the battery voltage at the ecu when the car is cranking?
kornsined
Posts: 53
Joined: Wed Feb 08, 2006 9:04 pm
Location: Edmonton

Post by kornsined »

I finally got this problem fixed. Fuel pump relay was burning out. Replaced it and all is good.
2004 Civic EX Coupe
K20a3 RSX spec, Greddy turbo kit w/FMIC, Apexi WS II Turbo muffler, 3" custom ... mandrel exhaust, KPRO = 230.03WHP 213.16WTQ
Locked