Car still jerky?

[kurt]

I have tried both disabling/enabling fuel over-run settings and lowering overrun cutoff values but the car still jerks quite abit. Am attaching the logs for review, appreciate if someone could help out.

Two issues I noticed in this log:

1. Fuel status goes from 'Open - Driving' to 'Open - Cold' at 1180rpm, which is exactly where the rpm starts to rise (TPS is 0% all the way in this log).

2. Just after the first second, cam angles drop from 9 degrees (1135rpm) to 0 degrees (1052rpm). I am guessing that this is a contributing factor as well to the car's jerkiness.

Thanks.

[Hondata]

To some degree you will always feel the injectors start up again when the over run cut off stops.

Reduce the ignition advance in the 1250 rpm row - look at the difference at the tables between 0 degrees cam angle and 10 degrees cam angle.