Detonation problems

scoobs187 · Post by **scoobs187** » Sun Jun 10, 2007 5:57 pm

I put the engine from the 88 Integra the B20 Vtec in the 95 Integra I built and I went for a quick drive. I dataloged this I just don?t know what im reading (what it means).

jordancivic · Post by **jordancivic** » Wed Jun 20, 2007 4:23 pm

Fueling looks good above 3500rpm FT, a little rich but nice flat line.
Are you still having det problems?

Hondata: on this datalog i have my MAP sensor set to PSI and im noticing that at idle he is reading 2/3psi. Is this just because PSI is positive pressure and wont show below around zero?

jordancivic · Post by **jordancivic** » Wed Jun 20, 2007 4:28 pm

Fueling looks good above 3500rpm FT, a little rich but nice flat line.
Are you still having det problems?

Hondata: on this datalog i have my MAP sensor set to PSI and im noticing that at idle he is reading 2/3psi. Is this just because PSI is positive pressure and wont show below around zero? When reading Mbar it reads fine, i know im missing something simple. Something to do with psi reads above atmospheric pressure or something? Thanks

Post by **Spunkster** » Wed Jun 20, 2007 4:54 pm

set to read "/psi

scoobs187 · Post by **scoobs187** » Sat Aug 18, 2007 3:15 am

What is the max map you can set for the software

Post by **Spunkster** » Mon Aug 20, 2007 10:00 am

scoobs187 wrote:What is the max map you can set for the software

What do you mean?