My car is an 02 RSX-S. Mods are Kpro, Hondata IMG, Injen CAI, PRC intake manifold, stock exhaust. I am using the CAI calibration. I am trying to tune columns 8, 9, 10 to a lambda of 13.5. I live at about 1100 feet, atmospheric pressure is usually around 97, 98 kPa. I went to Options-Settings- Lambda Overlay and changed the medium and high load values to 13.5. Downloaded the cal (open loop) and took the car out to datalog.
Afterwards I looked at the datalags. One of the runs was a WOT in 3rd gear. If I look at the fuel tables, the lambda for columns 8, 9, and 10 is 13.5, and the correction table says I am running a little rich. If I look at fuel command sensor in the sensors table it is asking for an A/F of 12.49 at WOT.
I don't get it. What am I missing? Shouldn't the fuel command be for 13.5? Have I missed a value adjustment somewhere in parameters or options? Should I ignore fuel command and just change the fuel values to achieve a 13.5?
What do I have to do to get fuel command to be 13.5?
Help, please!
uncledan
