Erratic A/F ratio... fine one moment, LEAN the next >>

K-Series Programmable ECU installation questions / support issues
Locked
tony4380
Posts: 2
Joined: Tue Jul 10, 2007 8:33 am

Erratic A/F ratio... fine one moment, LEAN the next >>

Post by tony4380 »

hey guys.... im just wondering why my air fuel ratio is so jumpy... the car runs and drives fine. i went out for a drive today and to do some datalogging and i notcied that the air fuel ratio was rich...
so i thought to myself ok... thats probably just from being tuned back in december... with the temperature differences. so when i get a chance, i do a 3rd gear pull with column 9 calling for roughly 5 points taken out. i do so.
i then proceed to make another pull. A/F ratio was at like 15.3 so i back off. i monitor my A/F at part throttle. the whole time im driving around its 14.9 - 15.7. I stop, turn the car off then back on. A/F was fine... hovering around 14.3-14.5.
so i start driving again... A/F is fine. i give it some WOT and watch A/F... no higher than 13.7... hmm. when i ome to the red light i glance over and its idling at 15.2... and im thinkin WTF???

anybody have any ideas?? please help me guys.

thanks in advance
88 CRX HF 02 k20a2 swap RBC/cold air/header 3in exhaust/ 410cc inj
User avatar
Hondata
Site Admin
Posts: 10616
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata »

Hondata
tony4380
Posts: 2
Joined: Tue Jul 10, 2007 8:33 am

calibration attached

Post by tony4380 »

here is the calibration

the car is a 88 honda CRX complete type s swap from 02rsx-s ecu is kpro prb. the wiring is all RSX inside and out... im using rsx ecu, ignition switch, everything.
You do not have the required permissions to view the files attached to this post.
88 CRX HF 02 k20a2 swap RBC/cold air/header 3in exhaust/ 410cc inj
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

hard to give answers without a datalog showing the problem
Locked