Tuning for VTEC Killer Cams and ITBs

aahill69 · Post by **aahill69** » Fri Jun 15, 2007 9:10 am

I'm installing VTEC KC and ITB's all at once. Which of the tables are used for tuning, the LO or the HI? Do you have to mix values from both tables into one?

Post by **Spunkster** » Fri Jun 15, 2007 10:35 am

If you are disabling vtec and VTC then you will just be using the low cam settings.

aahill69 · Post by **aahill69** » Mon Jun 25, 2007 9:58 am

What about tuning over 8k RPMs. The low tables go up to 8k only, and the scale is different.

jordancivic · Post by **jordancivic** » Mon Jun 25, 2007 11:22 am

Right click, delete.
Delete the lowest value on the rpm and it'll create another on the high end.