Back to stock?

knwldge54 · Post by **knwldge54** » Sun Jun 03, 2007 3:30 pm

I know you all don't have all the answers but hopefully someone has pondered this before. I'm selling a K-Pro prepped (by K-Pro dealer, not me) ready ECU on another forum and I'm sure this quesiton will come up. I already know that a relashed ECU can be reflashed back to stock. My question is can a K-Pro prepped ECU also be reflashed back to stock?

Post by **Hondata** » Sun Jun 03, 2007 6:56 pm

No. The closest you can get is by using the stock calibration.

knwldge54 · Post by **knwldge54** » Sun Jun 03, 2007 7:05 pm

Alright thanks. So provided the ECU itself still works fine (I tested it using my own board), would there be a problem it was sent for a K-Pro upgrade? This would of course be through a K-Pro dealer.

One other question: Since it's already been setup for a K-Pro board, could it conigured for use on an 05/06 RSX?

Post by **Hondata** » Mon Jun 04, 2007 8:59 am

It should be ok for both situations.