calib

98turbo · Post by **98turbo** » Thu May 31, 2007 11:29 am

I have a 98 GSR turbo (Greddy T05)with the set up as follows; compression ratio 9:2, AEM fuel rail; Fuel pump Wolsborro 255 psi and build bottom end (rods and pistons) + skunk retaining ring and ofcourse with the S300. Can some1 assist me on the calibration base on my set up or recomended some1 that is known to tune car. Your prompt response is greaty appreciated. Thank you in advance!

98turbo · Post by **98turbo** » Thu May 31, 2007 12:21 pm

I also got the 310cc rc injectors and possibly replacing this one with bigger injector with 550 or 650cc.