Cannot connect to s300!!!!

jdmcommute · Post by **jdmcommute** » Thu May 17, 2007 5:43 pm

I have a 2000 honda civic ex, D16y8 stock with exhaust, im running S300 with p72 ob1 comp.

I keep getting the "non compatible USB devices pop up."

Ive tested the USB port on laptop with other USB devices and they work and even switched USB cords, STILL not working.

How do I get the laptop to see the S300?

Post by **Spunkster** » Fri May 18, 2007 11:53 am

What shows up the the Windows Device manager when you plug in the s300 with the key in the on position?

jdmcommute · Post by **jdmcommute** » Fri May 18, 2007 2:59 pm

With the key on,in the windows device manager under universal USB devices, Hondata s300 doesnt even show up.

I just tried a different laptop and still no work?

Post by **Spunkster** » Fri May 18, 2007 3:11 pm

What does show up? When you plug it in, something will show up, and when you unplug it something will disappear.

jdmcommute · Post by **jdmcommute** » Fri May 18, 2007 3:16 pm

nope nothing shows up. I was hoping that the yellow box would be showing up next to it but not even the word hondata shows up anywhere?

Post by **Spunkster** » Fri May 18, 2007 3:36 pm

It may not say hondata. When you unplug it, does the device manager window go blank then come back?

jdmcommute · Post by **jdmcommute** » Fri May 18, 2007 4:08 pm

Yes when I plug it in and turn the key on, the device manager screen goes blank and then comes back on. but no changes in USB devices.

I have already updated drivers and tested USB,s but still says there non compatible.

deafy · Post by **deafy** » Fri May 18, 2007 5:46 pm

what operating system are you using? Did you perform a USB update through SManager?

jdmcommute · Post by **jdmcommute** » Fri May 18, 2007 6:00 pm

I am running windows xp. Yes I have updated every driver I could. Something interesting happens when I turn the key to on position.

The device manager screen blinks rapidly like 10 times then says at the bottom of screen that USB device not recognized.

jdmcommute · Post by **jdmcommute** » Fri May 18, 2007 6:09 pm

Im very angry with this software. Ive spent a considerable amount of money for something thats not working. :oops:

deafy · Post by **deafy** » Fri May 18, 2007 10:50 pm

Did you do the socketing yourself? Does a red " ! " mark come up next to the universal serial bus port under device manager?

jdmcommute · Post by **jdmcommute** » Sat May 19, 2007 12:08 am

No I dont know who did the socketing, I bought this on ebay. I did however pull the cover off and inspect the ecu to even see if there was hondata installed.

Hondata is installed and is very clean on the inside! I inspected for burnt solder joints and havent found anything.

Would this tpye of problem be a hondata problem or a connectivity issue with my laptop?

jdmcommute · Post by **jdmcommute** » Sat May 19, 2007 12:09 am

And no red mark appears either.

Post by **Spunkster** » Mon May 21, 2007 10:28 am

What is the serial number of the s300? It is possible that you purchased a damaged s300 since it was purchased from Ebay. There will also be some thing that shows up oin the devicemanager. IT may not be under USB, but may be in unknown devices.

jdmcommute · Post by **jdmcommute** » Mon Jun 25, 2007 9:48 am

My serial # is S300-0561.

How much would it cost for someone to look at it?

Hondata

Cannot connect to s300!!!!

Cannot connect to s300!!!!

Re:

Re:

Re:

Sorry for late reply