Greddy turbo

jbs06si · Post by **jbs06si** » Wed Aug 23, 2006 2:55 pm

Since i have already done the reflash can i also do the turbo and if so do i have to send my ecu back to you for any reason????

06civicsi · Post by **06civicsi** » Fri May 04, 2007 9:57 pm

i was also wondering the same thing.i have the reflash aswell and im about to install the greddy turbo kit.

i know that the advancing of the cam angle is what will make us lose power with a turbo.but how much did yall advance the timing?is it enough advancing to cause hp and tq loss?

Post by **Spunkster** » Mon May 07, 2007 9:43 am

We do not offer any reflashes for Turbo appliations for the 06-07 SI. With a Turbo you will need to return your ecu to stock.

06civicsi · Post by **06civicsi** » Mon May 07, 2007 8:49 pm

Spunkster wrote:We do not offer any reflashes for Turbo appliations for the 06-07 SI. With a Turbo you will need to return your ecu to stock.

but what if we already have the reflash and get the greddy turbo kit and run the e-management will the reflash have any effect on the way the turbo runs i.e. loss power if so about how much?,gain power.is it safe to run the reflash and greddy kit with e-management?

i know the probl. comes in with the advancing of the cam angle.in the thread i started asking the same question i was told by hondata that the cam angle was not altered much.was it just altered at the v-tec cross-over? or throughout the entire power band?

Post by **Spunkster** » Tue May 08, 2007 9:47 am

To use the emanage you will have to return the ecu to stock. The reflash was designed for NA.

jbs06si · Post by **jbs06si** » Sat May 12, 2007 6:53 am

why do i have to return to the stock ecu if i go with the e-manage ? what will it hurt or what are the problems with piggy-backing the re-flash?

Post by **Hondata** » Sat May 12, 2007 10:10 am

With the reflash there is too much ignition for forced induction.

jbs06si · Post by **jbs06si** » Sat May 12, 2007 10:47 am

OK, thank you for the info....any idea when or if you are going to come out with kpro for the 06 Si? I'm having a lot of problems with completing my turbo. I have the e-management ultimate but no harness for it except the hard wire one it came with and i DO NOT want to hard wire it. Any help will be great...

06civicsi · Post by **06civicsi** » Sat May 12, 2007 5:47 pm

jbs06si wrote:OK, thank you for the info....any idea when or if you are going to come out with kpro for the 06 Si? I'm having a lot of problems with completing my turbo. I have the e-management ultimate but no harness for it except the hard wire one it came with and i DO NOT want to hard wire it. Any help will be great...

you can order the pnp wire harnest from greddy.

jbs06si · Post by **jbs06si** » Mon May 14, 2007 5:30 am

they dont have it, its been on back order for over 4 months and they are not sure when TRUST is going to make it or ship it.

06civicsi · Post by **06civicsi** » Fri May 18, 2007 2:52 pm

jbs06si wrote:they dont have it, its been on back order for over 4 months and they are not sure when TRUST is going to make it or ship it.

try to check again.they just got a shipment in yesterday.