making aem uego work with s300

fk83 · Post by **fk83** » Sat Mar 24, 2007 4:45 pm

does any one know kow to set it up in computer

Post by **Spunkster** » Mon Mar 26, 2007 11:01 am

IT is exactly like the setup for the PLX wideband, but you cannot run the car in closed loop and use the wideband output at the same time using only one sensor.

http://www.hondata.com/techplxwiring.html

fk83 · Post by **fk83** » Mon Mar 26, 2007 6:06 pm

are the sensor voltages the same. can you run in close loop and data log tthe o2 thanks

Post by **Spunkster** » Tue Mar 27, 2007 9:39 am

No you cannot. The aEM has only one output. You must choose if you want narrowband or wideband output. IF you choose wideband output, you cannot use that sensor to run the car in closed loop. THis is why we recommend the PLX Devices widebnads, they have both narrowband an wideband at the sametime.

jordancivic · Post by **jordancivic** » Sun Apr 08, 2007 1:44 pm

If you got an AEM and want to run closed loop, use the AEM to ELD input, and use a stock o2 sensor setup as well. ie 2 o2 sensors.

allanonjj · Post by **allanonjj** » Tue Apr 10, 2007 1:12 pm

the voltage offset should be around -.4 . Just do a datalog and match your AF to the gauge.