b20 s300 setting

yz125rider21 · Post by **yz125rider21** » Tue Mar 20, 2007 11:02 pm

I want to say hi and I am a total noob to this and was wondering one thing....I bought a p61 with s300 installed and was wondering if someone had a preset settings for a stock b20??dont know if this is the right area to aso or what not...

hybridmoments · Post by **hybridmoments** » Wed Mar 21, 2007 1:12 pm

just use the P74 basemap that is found in SManager. works like a charm, runs excellen.
swapped my S300 from my EF into my B20 EG just to pass emissions and it passed with flying colors.

yz125rider21 · Post by **yz125rider21** » Wed Mar 21, 2007 9:36 pm

ok well I will do that but cant I program the ecu outside the car???cause it says I can update the firmware with it off.

Post by **Spunkster** » Thu Mar 22, 2007 9:37 am

No, the ecu must be in the car with the key in the on position to upload to it. There are no firmware updates.

yz125rider21 · Post by **yz125rider21** » Thu Mar 22, 2007 6:43 pm

ok thanks mate!

Hondata

b20 s300 setting

b20 s300 setting

b20 basemap