Datalog problem

DipDip · Post by **DipDip** » Wed Feb 21, 2007 12:34 pm

Hi Doug or Spunkster

- the calibration : attachment
- a datalog of a problem : attachment
- what sort of vehicle you have : ITR DC2 EUDM
- what sort of ECU you are using : Hondata P28 OBDIIa ((0536397) with S300 serial# S300-0079
- a specific description of the problem : see datalog
- Smanager release : 1.2.3.0 (same problem with all release)

Some infomation ?

Best regards

Didier

PS: rename test-1.s3d on test-1.zip and unzip

DipDip · Post by **DipDip** » Fri Feb 23, 2007 6:35 am

No news ? :roll:

Post by **Hondata** » Fri Feb 23, 2007 11:53 am

The datalog looks ok - what was the specific problem?

DipDip · Post by **DipDip** » Fri Feb 23, 2007 12:20 pm

See Screen Copy

DipDip · Post by **DipDip** » Sun Feb 25, 2007 2:07 am

Hondata wrote:The datalog looks ok

:shock: :shock: Nevertheless it is not the case on screenshots

Hondata wrote:what was the specific problem?

It is exactly my question put by this post

Post by **Hondata** » Sun Feb 25, 2007 1:06 pm

The datalog displays correctly for me. Can you send the datalog uncompressed? Also the datalog date is from October 2006 - is this the correct datalog?

DipDip · Post by **DipDip** » Sun Feb 25, 2007 1:47 pm

Sorry :oops:
Now, this the correct file

Post by **Hondata** » Sun Feb 25, 2007 7:31 pm

The datalog has been opened in an older version of SManager and then re-saved, scrambling most of the values. I'll change SManager to prevent this from occuring.

DipDip · Post by **DipDip** » Mon Feb 26, 2007 1:27 pm

Thank you.
I check by using always the same version.