integra type r fitment

[ep3sijdm]

i have a 2000 integra type r p73 obdb ecu.
setup:
dc headers 4-1
jrsc 5.5lbs psi
apexi exhaust
stock internals
aem intake

for me to use hondata. i would have to get a obd1 p72 or p28 ecu with obd2 to obd1 conversion harness.

would i need a obd1 distributor also if i were to go with either of these ecu?

also if i were to use a obd1 p72 or p28 ecu, do i need to get a vtec ecu or will hondata provide the vtec? or what year and model ecu from obd1 will i benefit more for my car?

thanks

[Spunkster]

You do not need to change the distributor. It is recommended to use a VTEC ecu, but with the new s300 solftware any ecu can operate vtec, but more custom wiring is involved for this to work.

[ep3sijdm]

if i were go to with hondata s300 plus PLX wideband 02 sensor, will i be able to decently tune my car myself? will that complete my own tuning?

does hondata s300 come with a base map for my stock jrsc car?

[Spunkster]

That should be all you need, but it really all depends on your abilities. There are calibrations built into the software...you can download the software and take a look.