used s200 no eprom what one do i need

[k8_crx]

what type of erpom do i need i no it is a 28 pin dip rom but can i get anyone or do i need a specific speed or one with a certain memory. also im fitting it in to a p28 ecu what other components need soldering to the board. on the instructions it says about a 1.1k resistor on r54 but not on the jdm one but as far as im aware it is a uk ecu but still not sure any help would be much appreciated thanks

[Spunkster]

Installation instructions can be found at http://www.hondata.com/downloads/s200%2 ... manual.doc

You can purchase a replacement chip through any Hondata dealer. The current chips used are SST 27SF512.