ON Startup car goes directly to idle

s300 and SManager software questions & answers
Locked
Thepanda
Posts: 2
Joined: Mon Nov 27, 2006 6:19 pm

ON Startup car goes directly to idle

Post by Thepanda »

Exactly as the title says when I start the car it goes up to like 1700 rpms then it immediately drops down to 1000. I checked the idle temp in the s300 and it is what is supposed to be(the stock settings)

I have a p72 in a 94 ls/vtec with an s300

Any Ideas would be helpful
crucian
Posts: 199
Joined: Sat Dec 10, 2005 9:42 am
Location: Lowville, NY

Re: ON Startup car goes directly to idle

Post by crucian »

Post your datalog or send it privately.
ben
Posts: 81
Joined: Thu Feb 12, 2004 8:14 pm
Location: Bloomington, IN

Post by ben »

Set the throttle plate bypass screw that feeds the IACV per the service manual procedures.

Or, you can just see if it's screwed in all the way. Turn left to open up the bleed screw and turn right to close the bleed screw.

Also, check the IACV duty cycle setting on idle settings. It should be in the middle.
Locked