Please verify if this is a 2b w/datalog

leed · Post by **leed** » Thu Apr 17, 2003 11:51 am

I purchased this used. Was told it was a 2b w/ datalog, but cannot connect. Tried all port settings (1-4, flowcontrol, FIFO buffer, etc...)
When I select ECU information, I get "communication error"
Sometimes get a popup: "This system does not have datalogging enabled"
Using Hondalogger ver 3.0.8.0

Please excuse the camcorder capture quality.

TIA,
Dave

Ok, pics should work now.

pills_PMD · Post by **pills_PMD** » Thu Apr 17, 2003 2:32 pm

no pictures are present

QUICKSILVER RACING · Post by **QUICKSILVER RACING** » Thu Apr 17, 2003 8:49 pm

stage 2 WITH BOOST AND NO DATALOGGING.

2BN

serial NUMBER SHOULD BE 2BDXXXX

leed · Post by **leed** » Thu Apr 17, 2003 9:28 pm

Not happy w/ that. But what can I do?? lol
When i received this Hondata, there was a receipt included from Hondata indicating the previous owner had purchased a Max232 Datalogging chip.
Is this not present on the board?

Thanks for the help,
Dave

Post by **Spunkster** » Fri Jun 27, 2003 4:37 pm

Download the most recent version of Hondalogger, and then go tot the ECU button and make sure you have it set to OBD1 version 2.5