Plug gap when spraying NOS

SLO-FKR · Post by **SLO-FKR** » Mon Nov 13, 2006 10:15 am

I have a 99 Acura integra GSR. I need to know what gap to use on my plugs. When I spray nitrous.

Asc4130SD · Post by **Asc4130SD** » Mon Jan 08, 2007 1:57 pm

I used the stock gap on my GSR .032,This is with the direct port NOS system (100HP). but i don't see any harm with going alittle bigger like .035 +/- .002 . The most important thing is making sure you get enough fuel, then reading the plugs is the next thing to pay close attention. and back the timing off a bit 2 to 4 degrees (retard) off base timing. Hope this helps :)