aftermarket cams for 06 si comp. w/ reflash?

06civicsi · Post by **06civicsi** » Sun Sep 17, 2006 10:53 am

i was woundering if there are any aftermarket cams that are comp.with the reflash for the 06 si?
also i heard that the tsx cams would be the best.is this true?

Post by **Hondata** » Mon Sep 18, 2006 8:46 am

This is not something which we have tested. Because the Si uses an AFM the fuel tables would be largely self correcting for cams, however the VTC timing would not be optimal.

06civicsi · Post by **06civicsi** » Mon Sep 18, 2006 6:10 pm

so if i would us the toda high pwer cams spec b and the vtc killer cam gears would that take care of the vtc timing probl.?and the afm would adjust to the new cams?

Post by **Hondata** » Tue Sep 19, 2006 8:42 am

No. The VTC Killer cams gears will not work with a stock ECU.

06civicsi · Post by **06civicsi** » Tue Sep 19, 2006 9:41 am

is hondata going to test any cams with the 06 si? pref. toda would be the best to test with! to see if any would work with the reflash?

Post by **Hondata** » Tue Sep 19, 2006 12:33 pm

It is up to the cam manufacturer to drive any reflash development for their products.

legendman · Post by **legendman** » Thu Sep 21, 2006 2:35 pm

Hondata wrote:It is up to the cam manufacturer to drive any reflash development for their products.

I heard you guys were working with IPS, any details you could give us.

This post contains hearsay (Automatically inserted as per forum rule #6)

06civicsi · Post by **06civicsi** » Thu Sep 21, 2006 8:25 pm

i know they are working with toda.

This post contains hearsay (Automatically inserted as per forum rule #6)

Post by **Spunkster** » Fri Sep 22, 2006 9:18 am

I heard they were bought by the Japanese...

This post contains hearsay (Automatically inserted as per forum rule #6)