S200 Problem

Jester · Post by **Jester** » Fri Aug 18, 2006 2:40 am

hey all,

My car seems to have reset itself. and everything is running crap. kind of a "safe Mode". when trying to connect with Hondalogger it says, "This system does not have datalogging enabled" does anyone know what is causing this or better still...how to fix it?

Post by **Spunkster** » Fri Aug 18, 2006 9:23 am

Is the light on the interface box flashing or solid? Are you using the Romulator or burning chips?

Jester · Post by **Jester** » Sun Aug 20, 2006 6:04 pm

the interface box is flashing and it happened burning chips.
any ideas?

Post by **Spunkster** » Mon Aug 21, 2006 10:20 am

It could be a socketing issue, problem with the chip or a problem with your interface cable...You will have to use process of elimination and use a multimeter to check continuity of the wires and traces on the ecu.

Jester · Post by **Jester** » Mon Aug 21, 2006 6:31 pm

we found the problem. its the actual chip. when the power was disconnected it must have wiped the chip.

would it be possible to get a Base ROM for a civic B16a2? we have an image for a b16 but if that falls through we were gonna just put it back to a base ROM. if you could possibly send me a base rom for a b16 civic that would be great.

cheers,
William.

Post by **Spunkster** » Tue Aug 22, 2006 9:22 am

We don't make or send out base maps, but you can contact your dealer and get one through them.

Jester · Post by **Jester** » Tue Aug 22, 2006 4:41 pm

cool, thank you for your help.