k20a3 turbo kal?

Konsept · Post by **Konsept** » Mon Aug 14, 2006 9:20 am

I've posted this question on the ClubRSX ecu forums and I'm not getting any info/hits... hoping I'll get something here.

A buddy of mine is getting Kpro for his car, however its the k20a3 motor (base/premium rsx) and its boosted (currently using Gaurdian - IIRC )

I noticed one of the calibrations available in KManager is the "K20a3-civic-440cc-greddy.kal"

Now to me and in theory, he should be able to use the greddy civic kal and just modify the injectors size and tune a/f accordingly until he gets it tuned.

Is there anything wrong with using the civic kal?

Thanks.

Post by **Spunkster** » Mon Aug 14, 2006 10:02 am

It will be a starting point, but you will not have use of the secondary runners, and the intake manifolds are vastly different.

Konsept · Post by **Konsept** » Mon Aug 14, 2006 9:49 pm

Spunkster wrote:It will be a starting point, but you will not have use of the secondary runners, and the intake manifolds are vastly different.

In that case is there a Base RSX cybernation kal?

Razathorn · Post by **Razathorn** » Tue Aug 15, 2006 7:43 am

Konsept wrote:
Spunkster wrote:It will be a starting point, but you will not have use of the secondary runners, and the intake manifolds are vastly different.
In that case is there a Base RSX cybernation kal?

There isn't, at least not in the kmanager install. What I would suggest doing is contacting Jason @ st00pid fast tuning. He has just recently tuned a base rsx turbo kit for a member on clubrsx. He *may* be able to give you a starting map or help you out in some fashion. I'd suggest calling him up.

Jason "St00pid" Herrera of St00pidfastuning
-Houston, TX
-HT name- st00pid
-Tele: 713-292-7298
-EFI Advanced Certfied