injector/ecu possible problem

spdracr70 · Post by **spdracr70** » Fri Aug 11, 2006 11:01 am

ok so i recieved my rc injectors the other day and just figured they where the right ones so i installed them well the car wouldnt start, i later realized the injectors where wrong and sent them back and recieved the saturated ones, install them car still wont start, this is the first time starting this built motor, is there a way to make sure the ecu is ok since i read about possible damgage with wrong injectors, i mean nothing changed how the car was trying to start with either injector so maybe i have the timing off a tooth or something
thanks
brian

Post by **Spunkster** » Fri Aug 11, 2006 11:30 am

First you must determine what the problem is. Do you if the injectors are firing and is there spark as well?

spdracr70 · Post by **spdracr70** » Fri Aug 11, 2006 1:18 pm

yes there is spark, fuel etc, just seems flooded

Post by **Spunkster** » Fri Aug 11, 2006 1:39 pm

You have either damaged the ecu, or you have messed up the wiring, or both.

YOu will have to oduble and triple check the wiring of the injectors.