accord 92 p06

george · Post by **george** » Sat Jul 22, 2006 5:50 pm

I have an accord 92 with a PT3. I want to switch it to a P06, but the PT3
drives 2.0 ohms injectors and the P06 12.0 ohms injectors. Does it affect the ecu or i have to do a jumper in the injector resistor, or just pulg it in.
I apreciate a response, thanks.

Post by **Spunkster** » Mon Jul 24, 2006 10:26 am

There should be a resistor box already installed in the car. All Honda ECUs are designed to run high impedance injectors, but earlier cars have a resistor box under the hood to protect the ECU from the low impedance injectors.

george · Post by **george** » Mon Jul 24, 2006 4:55 pm

thank you very much spunkster