vtec adjustment w/red button. ***not working***

bottlefedgsr · Post by **bottlefedgsr** » Tue Jul 18, 2006 10:26 pm

ive tried it in dynamic and static mode but it does not adjust. am i doing something wrong im going off of the online users manual...... thanks in advance

Post by **Spunkster** » Wed Jul 19, 2006 10:19 am

If you have the vtec point set in the ecu you cannot change it with the push button.

bottlefedgsr · Post by **bottlefedgsr** » Wed Jul 19, 2006 10:42 am

does the reset work still cause the vtec is popping at 6500

Post by **Spunkster** » Wed Jul 19, 2006 11:17 am

If the vtec point has been set in the ecu it cannot be reset using the push button. You will need to contact your tuner and have them reburn the chip with no vtec point set. This is not recommended as once the vtec point has been set after dyno tuning you should not be changing it.

bottlefedgsr · Post by **bottlefedgsr** » Wed Jul 19, 2006 11:35 am

so basically it is only good for changing the other 3 things listed then.

Hondata

vtec adjustment w/red button. not working

vtec adjustment w/red button. not working