p0134 DTC w/ ver 1.6?

portandpolish · Post by **portandpolish** » Sun Jun 11, 2006 10:45 pm

Unfortunately, for some strange reason it seems to be getting worse. here my Datalog, tell me what u think. My Kal hasn't changed by the way.

Post by **Hondata** » Mon Jun 12, 2006 9:27 am

The error code was already set when the datalog was made.

portandpolish · Post by **portandpolish** » Mon Jun 12, 2006 2:57 pm

Hondata wrote:The error code was already set when the datalog was made.

Yeah, I noticed that as well, however the CEL came on around 2:35.835 in the datalog? How is that possible ?

I will try another datalog to see what going on.

portandpolish · Post by **portandpolish** » Mon Jun 12, 2006 6:14 pm

Okay, Let's try this again. Here's a more concise datalog w/ the error. Thank you for your patients. As mentioned before it seems to be getting worse? Maybe we need to look at this problem from a different angle perhaps?

Post by **Hondata** » Tue Jun 13, 2006 8:47 am

The o2 is taking a long time to heat up. Check all wiring connectors between the ECU and primary o2 sensor for corrosion (especially under the car), otherwise it could be the o2 sensor.

portandpolish · Post by **portandpolish** » Tue Jun 13, 2006 11:18 am

Hondata wrote:The o2 is taking a long time to heat up. Check all wiring connectors between the ECU and primary o2 sensor for corrosion (especially under the car), otherwise it could be the o2 sensor.

I see, I don't understand it taking a long time to heat up? When the engine is cold I don't get the error, however, it only happens when I restart a "warm engine." My O2 sensor is brand new, just bought from an Acura dealership; Do you think they might have sold me defective part?