what o2 sensor should be used with each ecu.

K-Series Programmable ECU installation questions / support issues
Locked
o2ep3hatch
Posts: 3
Joined: Mon Aug 15, 2005 4:46 pm
Location: nj

what o2 sensor should be used with each ecu.

Post by o2ep3hatch »

Hey I am a little confused on what o2 sensor i should run on my 2006 rsx type s.

A buddy of mine is selling me a ecu. Now, we are uncertain what kind of ecu it is. It was done up by hondata, made into a kpro'ed ecu.

I remember I had a problem with one ecu b4. I had a 02-04 Type s ecu, i sent it out. Ran my 05-06 o2 and the ecu wouldnt read any of my tuning. i ran the 02-04 ecu and it loaded up the tunes perfectly.

now the problem i am having is, this might be a 02-05 Civic si ecu, would i need to run a 02-05 o2 sensor, or will the 02-04 type S ecu be just fine ?
hmmph
User avatar
Hondata
Site Admin
Posts: 10615
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata »

Match the o2 sensor to the ECU. Everything 02-05 uses the same o2 sensor apart from the 05-06 RSX ECU, which uses a different o2 sensor. The 05 EP3 uses the same o2 sensor as the 02-04 EP3 and RSX.
Hondata
o2ep3hatch
Posts: 3
Joined: Mon Aug 15, 2005 4:46 pm
Location: nj

Post by o2ep3hatch »

Hondata wrote:Match the o2 sensor to the ECU. Everything 02-05 uses the same o2 sensor apart from the 05-06 RSX ECU, which uses a different o2 sensor. The 05 EP3 uses the same o2 sensor as the 02-04 EP3 and RSX.
thanks
hmmph
Locked