i have a hondata stage 2 box but i don't have any of the wires that come off of it( buttons etc) i was looking at a pic of a s200 system and it looks EXACTLY the same as my S2. can i just use the same connectors and buttons as the s200?? also where can i get these if i CAN use them.
one last thing. i have the main 28 pin socket installed in my pr3 ecu... now what else do i do to the ecu in order to hook up the hondata??
stage 2 connectors/install
Installation instructions can be found at http://www.hondata.com/downloads/instal ... manual.doc
You can order replacment parts through any Hondata dealer.
You may find your life much easier if you convert to OBD1, sell the staged system and get an s300. Tuning will be much faster, it will be more reliable and you can datalog much more valuable information.
You can order replacment parts through any Hondata dealer.
You may find your life much easier if you convert to OBD1, sell the staged system and get an s300. Tuning will be much faster, it will be more reliable and you can datalog much more valuable information.