NO option for TPS ingition retard

rja357 · Post by **rja357** » Thu May 25, 2006 7:04 am

I was turned and from a base map. the map does not have the option for TPS ingition retard. I am trying to fix a blubber at low rpm in each gear. I have seen the table to be able to fix my problem but i do not have the option. Help

Post by **Hondata** » Thu May 25, 2006 9:08 am

Either you're using and old version of KManager, or you are using the Civic Si ECU. We're adding the ignition retard by gear to the next KManager release for the Civic Si / PNF ECU.

rja357 · Post by **rja357** » Thu May 25, 2006 9:35 am

this might clarify. I have a 03 si with a K20a jdm swap. usdm civic si ECU and K-pro. The tuner used a base map. But I have, i guess, the updated base maps. The civictype r base has the TPS ignition retard in it but my tuned map does not. so being that I was tuned with an older version, how do i convert my tuned map to new version with the TPS ingnition retard scale?

rja357 · Post by **rja357** » Thu May 25, 2006 9:37 am

here is my tuned map

Post by **Hondata** » Fri May 26, 2006 8:47 am

1. Download the latest KManager.
2. Upload the calibration to the ECU again.
3. Profit.

rja357 · Post by **rja357** » Mon May 29, 2006 8:26 pm

you are the man. Thank you. Now the questionis that I now have this, what are the remifications of changing this. I see that most people are running -50 gears 1-4 and -100 gears 5 and 6. What exactly does this change in relation to air/fuel ratios? I have made the change and the engine doesn't hesitate anymore, but I just don't want to make too drastic of a change.

Again thanks.

Post by **Hondata** » Mon May 29, 2006 8:59 pm

No change in AF. The ECU just does not pull as much timing out upon throttle tip in.