First Time Using Hondata/Can't Get IT TO Idle Smoothly

The Jacko · Post by **The Jacko** » Sun May 21, 2006 2:38 pm

My buddy just got the s300, I uplaoded on of the calibration maps into the ECU. I changed his injector sizes. I tried to pour fuel but still nothing. For some other reason the car idled between 1000 to 1250rpm, but it does that in column five and six. Also in some spots the ignition looks really low to me. I am in desperate need of help. I would like to show the map but I could not download it as an attachment. Would someone tell me how to do it.

Post by **Spunkster** » Mon May 22, 2006 9:53 am

Is this with the car fully warmed up that it has the high idle? What does the car idle at with teh IAC disconnected?

You just choose the location of the file you wan tto attach where it says browse, then after finding the file double click it and then submit.

The Jacko · Post by **The Jacko** » Mon May 22, 2006 4:31 pm

I disconnected the IAC and the car wants to stall. Still working on posting the map.

Post by **Spunkster** » Mon May 22, 2006 4:54 pm

set the map properly per the Helms manual instructions before going any further. Then you can make adjustments to the idle controll slider and the water temp idle tables.

The Jacko · Post by **The Jacko** » Mon May 22, 2006 7:54 pm

:? sorry,what is the Helms manual and where can i get it :oops:

alex · Post by **alex** » Mon May 22, 2006 11:53 pm

what map sensor are you using?

Post by **Spunkster** » Tue May 23, 2006 9:16 am

Helms manual is the factory service manual

www.helminc.com

The Jacko · Post by **The Jacko** » Tue May 23, 2006 9:11 pm

alex wrote:what map sensor are you using?

It's a stock map sensor

The Jacko · Post by **The Jacko** » Tue May 23, 2006 9:12 pm

Spunkster wrote:Helms manual is the factory service manual

www.helminc.com

I have a haynes manual