hondata S2 obd0

slow91crx · Post by **slow91crx** » Thu May 11, 2006 6:34 am

hey i just bought a hondata s2b for my b18c in my crx ( staying obd0 with a pr3 ecu) what all do i need for this to work correctly and get it tuned?? cables?? etc. i already socketed my pr3 for a cheap ebay chip but don't i have to also put a 4 pin or something?? any info on install etc and possibly an online instruction manual would be greatly appreciated

Post by **Spunkster** » Thu May 11, 2006 9:38 am

What is the exact serial number on the bottom of the Hondata system? If you have an s200 it will not work on an OBD0 ecu. I would highly recommend upgrading to OBD1.

http://www.hondata.com/techobd0conversion.html

slow91crx · Post by **slow91crx** » Thu May 11, 2006 1:42 pm

Spunkster wrote:What is the exact serial number on the bottom of the Hondata system? If you have an s200 it will not work on an OBD0 ecu. I would highly recommend upgrading to OBD1.

http://www.hondata.com/techobd0conversion.html

its not an s200 its a hondata stage 2. its made for obd0.

and i don't have it in my possession yet so i can't look at the serial number, but i know it is the old school hondata stage 2

slow91crx · Post by **slow91crx** » Fri May 12, 2006 1:16 pm

bump. need some info here. :D

Post by **Spunkster** » Mon May 15, 2006 9:21 am

Installation intructions can be found at: http://www.hondata.com/downloads/instal ... manual.doc