L15b7 swapped EG flashpro
-
Fkn SingleCam
- Posts: 2
- Joined: Sat Apr 18, 2015 9:51 am
L15b7 swapped EG flashpro
Im coming here to see if someone has any insight on this issue. I swapped my eg with an L15b7 and while cranking my injector ms and duty cycle stay at zero. If I add starting fluid in the intake the engine starts and everything runs perfect. I can drive around all day with no issues. The moment I turn it off it wont start again unless I use starter fluid. Immobilizer is not activated since the swap flashpro has removed it and it shouldn't stay running if the immobilizer was active. Low side fuel pressure is set to 60psi. High side cranking reaches over 1200psi. Im hoping its just some tuning issue where I have to add cranking fuel but im not seeing such option on flashpro. Anyone have a clue what the ecu is looking for during cranking to command the injectors on?
You do not have the required permissions to view the files attached to this post.
Re: L15b7 swapped EG flashpro
With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
Post the calibration and datalogs showing what it is doing.
Post the calibration and datalogs showing what it is doing.