Hi guys, need some help please with the calibration files.
When loading up the calibration file for the JDM FD2 (Civic-Si-RRC-1), the throttle section only shows "Throttle tip in fuel". There is no TPlate Normal table, or any of the throttle plate options.
However, if I load the FN2 file (Civic-Si-RSP-1), TPlate Normal is there, along with overun injector restart, throttle plate deviation, 1st gear throttle dampening, etc etc.
Why are all these options missing from the RRC calibration?
Many thanks.
FD2 Calibrations - Throttle Settings Missing
-
99thompson
- Posts: 2
- Joined: Wed Oct 08, 2025 5:15 am
Re: FD2 Calibrations - Throttle Settings Missing
I'm sorry, but this is due to differences in the ECUs and Hondas original programming.
-
99thompson
- Posts: 2
- Joined: Wed Oct 08, 2025 5:15 am
Re: FD2 Calibrations - Throttle Settings Missing
That's a great shame, I bought FlashPro based on the feature set listed in the FlashPro Help topics.
https://hondata.com/flashpro-help
Under the section, Reference > Vehicle Specific Notes > Civic Type-R 2007-2011.
Features (Asia)
Throttle
• Target throttle plate table
• Tip in fuel
But target throttle plate table is not available. So, ultimately the product is not advertised correctly.
Again, a great shame.
https://hondata.com/flashpro-help
Under the section, Reference > Vehicle Specific Notes > Civic Type-R 2007-2011.
Features (Asia)
Throttle
• Target throttle plate table
• Tip in fuel
But target throttle plate table is not available. So, ultimately the product is not advertised correctly.
Again, a great shame.