K24a2 into a 2006 CR-V
K24a2 into a 2006 CR-V
I have a K24a2 swapped into a 2006 CR-V that has been converted to a drive by cable throttle body and have K Pro V4 installed. Car runs good but I cannot get the RPM gauge working on my oem cluster and Kpro cannot read the VSS. My speedometer on my oem cluster does work and I have verified that the speed is correct. Has anyone come across these issues?
-
Apere1965
- Posts: 1
- Joined: Wed Sep 03, 2025 8:16 pm
- Location: https://spacewaves.io
Re: K24a2 into a 2006 CR-V
I had a similar issue after my K24 swap into an RSX — RPM signal wouldn’t go to the OEM cluster.
-
EndlessProjects
- Posts: 1
- Joined: Sat Oct 25, 2025 8:57 pm
Re: K24a2 into a 2006 CR-V
Just installed a PRB ecu and I'm having no Temp on the cluster. is there a fix for this? Do i need to install the kpro board to the original PPA ecu?
Re: K24a2 into a 2006 CR-V
A 2006 CRV is not supported.