Help for fuel pressure sensor in analog input..

s300 and SManager software questions & answers
Post Reply
Bowo gono
Posts: 5
Joined: Fri Apr 19, 2024 4:47 am

Help for fuel pressure sensor in analog input..

Post by Bowo gono »

Hello Honda, I added an external sensor, a fuel pressure sensor, for data og.

The diagram follows the instructions:

Black to B2

Red to D19

Signal to AN0

After I did everything, the value in Smanager shows no change and remains at 10 bar.

Sensor installed, value 10 bar

Sensor not installed, value 0 bar
Is there a solution?
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Spunkster
Site Admin
Posts: 23878
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Help for fuel pressure sensor in analog input..

Post by Spunkster »

Post the datalog showing the issue.
Top
Bowo gono
Posts: 5
Joined: Fri Apr 19, 2024 4:47 am

Re: Help for fuel pressure sensor in analog input..

Post by Bowo gono »

datalog
You do not have the required permissions to view the files attached to this post.
Top
Bowo gono
Posts: 5
Joined: Fri Apr 19, 2024 4:47 am

Re: Help for fuel pressure sensor in analog input..

Post by Bowo gono »

Problem solved bad sensor
Top
Post Reply

Return to “s300 / SManager”