KPro / KManager requests

[slowep3si]

sorry live tuning not live data

[Fkay8]

I know that already has been talked about but regarding rev limiter by gear is will be possible to have this feature available in Kmanager?

Thanks

[Arno]

Small, mainly cosmetic, Kmanager request. From info here: viewtopic.php?p=139202#p139202

Could the 'Disable fuel over-run cutoff delay' option be re-worded in the Kmanager GUI so it's more in-line with the actual explanation of the feature in the docs?

At the moment it's actually doing the opposite of what most people expect from the somewhat vague and contradictory wording used in the GUI.

Small thing, but if it saves some people finding this out the roundabout-way from datalogging and experiencing contradictory results to what they expect then it would be nice.

Bye, Arno.

[Jakermac]

Is there any more development taking place with K Manager or is it only maintenance from here on out?

[Hondata]

Both the OBDII and K-Series ECUs do not have a lot of spare processing power so we cannot add extra feature that consume processor time. Do you have specific requests?

[Jakermac]

I asked in 2018 for TPS based boost control and at the time was told that it was “added to the list”.

[EGK2082]

Is there any future development for any kpro v5? There is a lot of ECU competition with multiple functions

[shiftyjonno]

Request for a keyboard shortcut to auto select the cells being logged in both SManager and KManager softwares.


Background:
I have created a device using an Arduino that reads the torque output voltage from the Mustang dyno I use, and subsequently changes the fuel/ignition timing accordingly to reach MBT, ONLY when I press and hold a button.

This device outputs keystrokes via USB to complete a couple of tasks.
First task: Select the cells that are currently being logged. Example Ctrl+Space
Second task: Increase / Decrease the ignition timing (based on the torque voltage output) using Ctrl+Up / Ctrl+Down etc.

I have tested this device in OBD1 tuning software which DOES have the ability to select the cells being logged, and the results were fantastic. I'm really happy with it. In both a slow load sweep at sustained RPM, and at road load in sustained RPM, the torque optimization gain was clear.

I would like to be able to do this with Hondata software too.

[b18c6itr]

Hello Hondata,
I have been on the latest Kmanager software since its last released in 2024. I recently been having issues that
1. when pc is hooking up to Kpro V4 the A/F ratio is show 0.00 but my apple cellphone hondata complete is showing the AFR perfectly. I couldn't figured out why it's doing that but with my data logging the afr is showing in the log just not in the display tabs.
2. Hondata complete app can't reconnect to the phone but close the app and it will reconnect again since late 2024 version updates.

I would be much appreciate if your backend software engineerings can look into this matter and have it fixed for us.

Thank you
Lawrence C