FlashProManager V4.4.4

[Hondata]

FlashProManager 4.4.4 (24 Mar 2025)

• Firmware updated to version 257
• [FK8] added extra datalogging sensors
• [CanFlex] Fixed MIL with older FlashPro under some conditions
• [2016+ Turbo Civic] Added support for 2020 model 5AW-TG1 Turkey
• [2018+ Accord 1.5T] Fixed no start issue

Download here

[Ziradon]

Hi,

can you specify the extra datalogging sensors for the FK8?

And do they work with just updating the flashpro or is reflashing the map to the ecu necessary?


Thanks,
Thomas

[Hondata]

The ECU has to be reflashed.

'Trq Req' = torque request
'Act Trq' = actual torque

See the help file for more information on those
https://hondata.com/help/flashpro/torque_parameters.htm
https://hondata.com/help/flashpro/bosch ... _model.htm

Additional channels for helping diagnose torque limits in high hp vehicles (over 600 hp)

'trq_max', 'arc_max', 'airc_red'

[jeffx]

The ECU has to be reflashed.

'Trq Req' = torque request
'Act Trq' = actual torque

See the help file for more information on those
https://hondata.com/help/flashpro/torque_parameters.htm
https://hondata.com/help/flashpro/bosch ... _model.htm

Additional channels for helping diagnose torque limits in high hp vehicles (over 600 hp)

'trq_max', 'arc_max', 'airc_red'

THANK YOU VERY MUCH!!!

[FK8_Hoonigan]

MUCHAS GRACIAS!!!!

This will be very handy for us!

[FK8_Hoonigan]

Not being picky, i appreciate all the hard work....

Just pointing it out in case it flew under the radar... The "tracer" marker on KFMIRL table for FK8 doesnt show for the column/row

[Hondata]

It is no problem; simple to fix.

[Fkay8]

Hello Hondata, just a question regarding a new datalog value (torque request), on my calibration I have on the torque request table a value of 500nm (~83%) but on the datalog torque request value shows 87% (522nm).
I'm not uderstanding why this diference, doesn't this value should be same on my request table of my calibration?

The aircharge max is correct with my calibration table.

Thanks

[jeffx]

which car? FK8? FL5/DE5? Probably should post this question in the Type R 2015+ forum and provide more specifics

[Fkay8]

which car? FK8? FL5/DE5? Probably should post this question in the Type R 2015+ forum and provide more specifics

FK8

[AllenZhangFE3]

I've been eagerly awaiting the release of this version for a long time, but unfortunately, it still does not include support for my car model. Ever since I sent the original factory program to Hondata in December last year, I've been on a long wait. I'm very eager to know whether the 37820-6KA-H030 will be supported in the next version. Thank you very much for all your work.

[Spunkster]

Please send the file again.

Is this a hatchback?

[AllenZhangFE3]

I have attached the stock program and description file that I read using PCM Flash. This is a Chinese domestic sedan, and I am very sure that it belongs to the same generation as the 37820-64C-H01 (hatchback) that Hondata already supports. If you need further information, I can send it to you via email. Back in February, Matt told me that support would be added in about a month or more. I hope it will be updated in the near future. Thank you very much!

[AllenZhangFE3]

So, can we look forward to the next update? Thank you!

[Spunkster]

Our software engineer is working on this.