JDM k24 TSX swap on a 08 Si and using most of the Si sensors

brandenpeterson · Post by **brandenpeterson** » Thu Jan 30, 2025 11:35 am

Finishing up a JDM k24 TSX swap on a 08 Si and using most of the Si sensors, 310 fuel injectors and crank pully, mods are basic header no cat and stage 4 flywheel and clutch. going to start with Sebastian.SD.Rev14 (Blended)(Vtec4200).fpcal or will data log. if there is a link that show how to post data logs that would be helpful to me. thanks Branden

CalibratEd · Post by **CalibratEd** » Wed Feb 05, 2025 8:33 am

When replying look for the attachments tab at the bottom. Once you’re in that tab click the add files button.

-Ed

brandenpeterson · Post by **brandenpeterson** » Wed Feb 12, 2025 12:42 pm

Hi Ed,

This tune (Sebatian v14) drives really nice! great power pre vtec and post with seamless vtec crossover. I have gotten some Mis fire detection on warm up this could be some program learning or I have the wrong spark plugs (current SI, but will try TSX Plugs)

o8 si.fpdl

.

brandenpeterson · Post by **brandenpeterson** » Wed Feb 12, 2025 12:45 pm

the Data log was done at 10,300ft in cold weather, so if it looks a little rich thats ok because the car will see road coarse time this summer at 4000-5,600 feet

brandenpeterson · Post by **brandenpeterson** » Wed Feb 12, 2025 12:51 pm

another data log

Hondata

JDM k24 TSX swap on a 08 Si and using most of the Si sensors

JDM k24 TSX swap on a 08 Si and using most of the Si sensors

Re: JDM k24 TSX swap on a 08 Si and using most of the Si sensors

Re: JDM k24 TSX swap on a 08 Si and using most of the Si sensors

Re: JDM k24 TSX swap on a 08 Si and using most of the Si sensors

Re: JDM k24 TSX swap on a 08 Si and using most of the Si sensors