I have a non Honda chassis and a 2006 TSX 6 speed donor car.
I’m finding conflicting information about the ability to use the engine wiring/ecu with KPro and looking for some clarification.
Thanks!
2006 TSX 6 Speed Driveline Swap
Re: 2006 TSX 6 Speed Driveline Swap
The TSX engine harness and ECU is not compatible with the K-Pro. You must use an 02-04 RSX ECU and engine harness. IT must also be converted from drive by wire to a cable throttle body.
-
Maritime Guy
- Posts: 2
- Joined: Mon Jan 13, 2025 2:24 pm
Re: 2006 TSX 6 Speed Driveline Swap
Thanks for the clarification!
One further question if I was to use a 02-04 manual CRV or Element harness instead of the RSX one would that work? The RSX ones seem to be fairly rare in my area
One further question if I was to use a 02-04 manual CRV or Element harness instead of the RSX one would that work? The RSX ones seem to be fairly rare in my area
Re: 2006 TSX 6 Speed Driveline Swap
CRV may work, but untested. Element will not work.