S2000 Kpro Wiring

K-Series Programmable ECU installation questions / support issues
Post Reply
chudomino
Posts: 2
Joined: Fri Aug 30, 2024 3:30 pm

S2000 Kpro Wiring

Post by chudomino »

I have a 2000 Honda S2000 with a Kpro v4. I was trying to run a signal to the ECU's E22 brake switch so I could have a switch for the launch control but I cannot locate a diagram for which wire is running into my ECU. The Hondata website shows it is on the connector e22 pin and is the a32 on the s2000, but I cannot find a diagram showing which connector it is.
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Spunkster
Site Admin
Posts: 23878
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: S2000 Kpro Wiring

Post by Spunkster »

The info at https://hondata.com/help/kmanager/ecuconnectors.htm is correct. It is on the A connector pin 32.
Top
chudomino
Posts: 2
Joined: Fri Aug 30, 2024 3:30 pm

Re: S2000 Kpro Wiring

Post by chudomino »

Spunkster wrote: Fri Aug 30, 2024 4:01 pm The info at https://hondata.com/help/kmanager/ecuconnectors.htm is correct. It is on the A connector pin 32.
Thanks, got it working.
Top
Post Reply

Return to “K-Pro / KManager”