SManager 2.8.7

[Hondata]

SManager V2.8.7 (29 Jun 2024)
•[S300 V3] Firmware version 22
•[S300 V3] Improved onboard datalogging
•[S300 V3] Improved onboard calibration storage

This release fixes any problems when on board datalogging and laptop datalogging and then uploading a calibration at the same time.

Download here

Please only reply to this thread with issues & questions specific to the changes in this release. For all other problems start a new thread under the appropriate vehicle category.

[yball26]

]Hello, I have problems with the data log of my track pass, they had always worked quite well, sometimes I had an error in the data but now everything is wrong, the miles per hour says 400mph and crazy things, if you have a way to fix the data or download again I tried two different laptops and the same error still occurs, it's Windows 10 in case you ask me. Thank you, I look forward to your prompt response.

[Spunkster]

What is the serial number that is on the s300 board inside the ECU?

[yball26]

59843

[Spunkster]

Are you datalogging with the laptop, or are you using on-board datalogging?

[yball26]

on board

[yball26]

I never had any problems with the laptop.

[Spunkster]

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.

[spAdam]

Any chance that PLX protocol was dropped from the digital inputs in the latest firmware?

I haven’t used my S300 in almost a year and I updated everything before I plugged up. I can’t get the digital inputs from my sm-afr. I’ve confirmed wiring is solid and continuity is good, the PLX gauge is working off of the Y-connector so I know the sm-afr is broadcasting. Worked flawlessly in the past.

Any ideas?

[Hondata]

No changes have been made in that area.

[spAdam]

Copy, thanks. I’ll keep digging.

[wanganracing93]

SManager V2.8.7 (29 Jun 2024)
•[S300 V3] Firmware version 22
•[S300 V3] Improved onboard datalogging
•[S300 V3] Improved onboard calibration storage

This release fixes any problems when on board datalogging and laptop datalogging and then uploading a calibration at the same time.

Download here

Please only reply to this thread with issues & questions specific to the changes in this release. For all other problems start a new thread under the appropriate vehicle category.

Hi team, I’m currently having issues with this, im getting “out of date” even though I downloaded the most recent software out the website. Unable to connect to the laptop. Attached is image of error.

Please help I just bought this car and it came with an s300 and I’m trying to see what it’s running on. Thanks in advanced.

[Spunkster]

What computer, processor and version of Windows are you using?

[wanganracing93]

attached is all the info. thanks for the response

[Spunkster]

Go to the help menu and click on about and take a screenshot and post it here.