Gear comp

Maverik · Post by **Maverik** » Fri Mar 10, 2006 1:12 pm

Hi!
I've a K-Pro installed on a ECU type PRA (European Civit Type R). Is it possible to change the tables for fuel and ignition compensation and gear ratios? If so, how?
Thanks

Post by **Spunkster** » Fri Mar 10, 2006 1:25 pm

Have you installed the KManager software and taken a look at the options in it?

Maverik · Post by **Maverik** » Fri Mar 10, 2006 3:08 pm

Yes I have.
In practice, once I've opened my calibration file with KManager, I go to Parameters and then Gear Comp but I cannot modify the tables that are there..
Am I doing something wrong? Do I need to activate some options?
Thanks

Post by **Spunkster** » Mon Mar 13, 2006 11:05 am

Can you post the calibration you are trying to use? Try going to File, New and using one of the base calibrations, can you now see and edit the gear compensation?

Maverik · Post by **Maverik** » Mon Mar 13, 2006 2:22 pm

I tried to do what you suggested, but it didn?t work. Attached the calibration file I?m trying to modify.

Post by **Spunkster** » Mon Mar 13, 2006 2:36 pm

Make sure you are using the newest version of sftware by going to help and selecting Check for updates. The current version is 1.2.1.3

Maverik · Post by **Maverik** » Mon Mar 13, 2006 3:04 pm

I'm using version 1.2.1.3, but I also tried the beta version 1.2.1.5 without any luck..

Post by **Spunkster** » Mon Mar 13, 2006 6:43 pm

Strange, because the same versions here with your calibration are working perfectly. Can you send a screenshot of exactly what you are referring to.

Maverik · Post by **Maverik** » Tue Mar 14, 2006 10:27 am

The problem was on my laptop: on my desktop KManager was working OK.
I've formatted my laptop and reinstalled all programs and everything is working fine.
Thanks a lot.