Need Help with CAM ANGLE. difference between CAMCMD and CAMANGLE

[pmateo93]

Hello,

I recently built my turbo car.

I have stock k20z3. I'm in the process of tuning via datalog with Derek Robinson from Innovative Motorworks.

The car is presenting a difference in the cam angle, a kind of oscillation.

We changed the VTC actuator, Vtc selenoid, VTC filter, VTEC filter, camshaft sensor.

See the attached image. The issue It is more noticeable when the car is cruising, at low speed better cam angle.

[Hondata]

What vehicle is that? Are you using an 02-04 ECU or 05-06 ECU?

Edit: Sorry, ignore this - got confused with the KPro.

[pmateo93]

What vehicle is that? Are you using an 02-04 ECU or 05-06 ECU?

Honda Civic SI 2008 Canadian OEM ECU

[Spunkster]

What oil are you using?

[pmateo93]

What oil are you using?

Repsol 10w-40

[Spunkster]

Do you have a restrictor on the oil line for the turbo?

[pmateo93]

Do you have a restrictor on the oil line for the turbo?

Yes, the turbo has a restrictor.

[Spunkster]

What oil pressure are you getting?

[pmateo93]

What oil pressure are you getting?

At Idle: 20-21 PSI
Cruising: 60-80 PSI
WOT: 90 PSI

[pmateo93]

I have this ecu part 37820-rrb-k01 any problem with that ecu?

[Spunkster]

That ECU is compatible.

[pmateo93]

That ECU is compatible.

UPDATE: We change the ecu and we still have the same issue with the cam angle.

[Spunkster]

Then it sounds like a wiring or mechanical issue in this vehicle.

[vsperformance]

You solved it or still with this issue?